I’ve done a lot of work since Christmas but I haven’t blogged it. I’d thought I’d only done a few things but went back to check the photos and surprised even myself so here goes…
First up is a headband that I knit using Kate Davies pattern WWWW #1. This is a free pattern that can be found on Ravelry so if you aren’t a member I can highly recommend joining as it’s one of the best databases out there with tons of patterns, yarns, forums, etc.
The thing that is special about this headband is that it’s the second finished project that I’ve knit using yarn that I’ve handspun myself. The headband is a bit tall in these photos but that’s my own fault because I thought I was off gauge so tossed in extra rows, I should have left the pattern alone. This is the first time I’ve knit a lining into anything and picked up a provisional cast-on. The white lining was alpaca for softness.
The next project I worked on was a cowl I started while on vacation in Florida. We went down at the beginning of January and I took the headband pictured above to work on along with a spindle. I also took a lot of books but ended up knitting and watching reno shows inbetween walking the beaches. Well I finished off the headband and then had to go out and find something else to knit so I picked up a ball of Berroco lace and started in on this cowl. It’s a nice drapey cowl and while it took a lot of effort to finish it I really like how it drapes and folds in on itself. The cowl will go to Dan’s girlfriend so I hope she likes it. The cowl is called Willow Cowl by Amelia Lyon and is another free Ravelry pattern.
I belong to the Bliss Spinning Wheel forum on Ravelry and the girls decided that this year will be one for the beginning spinners (there are a lot of us) so each month of 2014 will feature a different type of fibre or method of spinning. For the month of January the featured fibre was BFL – Blue-faced Leicester. I have some superwash BFL so decided to try my hand at dyeing again only this time using the Jaquard acid dyes I bought for Christmas. Unfortunately I’m not sure where the photos of the dyepot are, maybe I forgot to take them, oh well the pot was half blue and half yellow but mostly green by the time it was done.
Fingering weight yarn in BFL superwash.
Well before we left for Florida my chiropractor of eight years informed me that he and his girlfriend were expecting a baby in February so while I’m congratulating him I’m thinking that doesn’t leave me much time to get a baby gift ready. I see my chiropractor each week so he’s like family to me so I had to make something. Well we got back home and a week later I’m getting ready for my appointment when the office phoned to cancel as he was in the delivery room – three weeks early awk! Anyhow after thinking about it and going to my stash I settled on a very simple quilt with lots of colour and this is what I came up with – hand-dyed backing of course.
Backing dyed with Procion MX dyes in Lemon Yellow and Turquoise.
Finally, another handspun project for February’s challenge for the spinning group. This time the lesson was to try and create a big and lofty type of yarn, which usually means spinning woollen. I carded up some of the Shetland fleece that I had washed a couple of months ago into four big batts and then spun it up woollen. I didn’t fuss about what happened so the resulting yarn is quite rough but I wanted that look. I’m hoping to knit it into a hat for my husband John, something simple and guy-like that he’ll want to wear. I’ve decided to keep it natural for now and I can always dye it later if need be.
Well that’s all for now. I have another baby quilt to finish by February 22 and I haven’t started but I have an idea for it so that’s half the battle. I also have the hat to knit and then I should be free of projects for the next little while. I bought a new pressure canner while down south on vacation, saved myself about $200 so I was pleased and I’ve been reading up on pressure canning soups and meats so we’ll see how that turns out.
Well Christmas is almost upon us and I really haven’t gotten much done to show for it. I found out that I have the beginning stages of Rheumatoid Arthritis so have been mired in the Internet for the last three weeks trying to figure out what happens with this disease. I did start some knitting today but I have to admit that as far as getting homemade gifts ready for Christmas this year was so-so.
I did make some more oven towels.
The tutorial for these towels is over at the right-hand side of this blog.
I also spun up a little hank of the wool I had dyed (shown in previous posts).
Shetland black, dyed shetland boysenberry and tangerine.
I also managed to do a low-water immersion shirt for my son.
Jaquard Jet Black, ProChem Intense Blue. The grey/brown was the jet black separating in the water.
I also bought some stuff from KnitPicks.
Enchanted Lake sock yarn.
Close-up of the sock yarn because it’s so pretty.
Jaquard acid dyes to experiment with my wool after Christmas.
Some baby alpaca yarn on sale.
Not much else going on right now. I need to clean the dining room and put up the tree (I hate doing this but the grandkids will be here) so I can’t see blogging again before Christmas so I’m wishing everyone a Merry Christmas and a Happy New Year 🙂
I seem to be having great fun washing fleece and spinning up yarn and then making projects from the results. In fact looking back at my last few posts I realize that I’m a bit behind on posting pictures of finished projects. So before I get to the topic of this post here are a few photos of projects that I’ve finished.
Here is a cowl that I knit up using the polwarth and gold angelina fibre that I blogged about a few posts back. The gold sparkle is nice and subtle but unfortunately you can’t see it in the photo.
Elizabeth’s Cowl, by Wendy D Johnson from the book “Wendy Knits Lace”. This is a wonderful book full of good patterns and useful tips. I had taken it out from the library and ended up buying it.
Another project that took a good month to complete and has actually give me shoulder problems from working too many hours on it was Feather and Fan Short Scarf by Kelly Faller. My problem was the scarf wasn’t short I knit it 60″ long.
A couple of ways to wear it. Not handspun but Paton’s Lace Sequin yarn knit on 5mm needles.
I’ve also been playing around making more yarn but I’ll save that for another post when I finish knitting up the yarn.
Now back to the Girly-girl hat and cowl other known as the 5-Hour Hat and Gaiter by Rachel Kluesner…it started like this.
Some shetland fleece, unwashed in front and some washed in the background for comparison.
Woolen yarn spun with the washed fibre.
Dyeing the fibre with Wilton’s Sky Blue – turns out it’s really bright!
Photo showing the exhausted water.
This is the finished dyed yarn. Both skeins where dyed at the same time but in the one skein I got some barber poling effect. This was a single that was wound into a center-pull ball and spun two-ply on itself. The one end (that corresponded to the middle of the ball) dyed solid while most of it dyed one ply light blue and the other ply darker blue. The only reason I can come up with for this effect is that when I grabbed fibre to card on my drum carder I must have grabbed fibre from two different washed lots. One lot must have been cleaner than the other. Someone said the cleaner fibre probably dyed darker but my hair stylist always told me not to wash my hair before a dye job so the colour would take better so I’m not sure whether the dirty fibre dyed darker than the cleaner fibre. Another experiment for another time.
Winding on into a ball.
5-Hour Hat and Gaiter by Rachel Kluesner otherwise affectionly known as the Girly-girl Hat and Cowl by yours truly. Knit using Shetland wool and pink bobble novelty yarn on 6.5mm and 9mm cable needles.
As I was winding some of the bulky yarn I’ve spun it suddenly occurred to me to share this tip on how to extend your ball-winder through use of a toilet paper roll. I actually did think up this all on my own but have since discovered that others use this idea as well. It’s the old thing, if you’ve thought of the idea then sure enough someone else has as well.
What I do is to take a toilet paper roll, cut it in half and then retape the roll around my Knitpicks ball winder. It’s possible there are better winders out there and you don’t need to do this but for $20 I’m happy with the knitpicks winder.
My winder is slightly wider at the bottom than the top so as I go along with the tape I start at the bottom and work my way up to the top putting the tape in pieces around the roll. Keep the roll tight and snug to the plastic core as you do this. If you tape too loosely the roll will spin off as you wind the yarn on. At the top I then put some pieces of tape length-wise going around the circumference. I do this because I’ve found that the yarn can catch on the roll where the groove spirals up. If you use the modified toilet paper roll enough that little ends starts to come unstuck and your fine yarn can catch on it as you wind. Next, cut two slits in the roll opposite each other; you use these to hold your yarn end as you start winding.
Adding the roll to the winder does two things. One, it extends the length of the winder so you can make larger ‘neater’ yarn cakes, this is handy for thicker yarn. Two, I find the grooves on the Knitpicks winder don’t hold my yarn that well so I’m always fiddling to try and make the end catch.
Ball winder with toilet roll addition.
Bulky yarn wound on ball winder.
Size of yarn cake compared to the regular ball winder height.
Hope this post is helpful to you.
I’ve finally finished my Holden Shawlette – pattern created by Mindy Wilkes(free download on Ravelry). I knit quite a bit of this while on holiday in Italy and Sicily so the shawl is multinational you could say. We spent hours on the bus travelling from one spot to another and although the countryside was great to look at it all turns into a bit of the same after a while so out came the knitting.
The yarn was spun on my spindle and made from rolags made on my blending board. The fibre was from Jamieson and Smith’s combed Shetland top. Here is a progression of photos of the process.
This shawl was the first finished project that I’ve made from handspun so I’m proud of the fact that I made it from fibre to finished shawl. The picot bind-off edging was a first for me as well. It takes about three times the normal length of time to bind-off but it makes for a very pretty edge, it won’t be the last time that I use this technique.
The next project I’m working on is a lacy scarf for a Christmas present. I hope to finish this quickly as I want to make a matching tam and fingerless mitts to go with it.
I haven’t done any knitting the last couple of days but I have been playing around with yarn and roving. The first photo shows some rolags that I made using the piece of carding cloth I have that’s waiting to be made into a blending board.
Rollags made from blue and white shetland wool top from Jamieson & Smith.
Fingering weight yarn spun on my Ashford spindle.
Next I brought up an old box of yarn from the basement looking for another project that I’d started but not finished many years ago.
White Buffalo Yarn sweater.
After looking at this project I realized there were some leftover balls of yarn in the same box so I thought that I would try and find some room in my large tote for them. My tote has all my acrylic leftovers in it along with a few whole balls of yarn as well. Mostly it was a mess so I thought that if I wound all the balls into layer cakes I’d make more room for the new/old balls.
Bin partially filled with layer cakes. Filled it to the top by the time I’d finished winding the above yarn.
After winding all the yarn in the bin, I discovered that I didn’t have any extra room than before I’d started so all I can say is that I wasted an afternoon but I do have a tidy tote bin full of layer cakes. I just have to find somewhere else to stash the other balls.
Well I’ve finally finished Jonathan’s sweater – about 16 years to late but it’s done. I believe I started this sweater when he was about 10 years old, he’s now 26 years old. I ran a Ravelry UFO KAL in March for my group Surmount the Stash (stash busting) and decided to finish this sweater for my project.
“Kids Like Fair Isle Too” from Beehive Nordic Knits. Baycrest Shetland chunky yarn.
When I first started to knit Fair Isle all those years ago the book I learned from was from Beehive and called Nordic Knits. Now after all these years, children, work, quilting and back to knitting I’ve come full circle.
I haven’t been posting much because really there hasn’t been much to post. I haven’t really gotten much crafting done as I’ve been taking a break with my shoulder being so sore. I did go see the rheumatologist yesterday and she gave me a shot of cortisol so we’ll see how that goes. I do seem to be able to move it farther than before so that’s something.
First up I did finally manage to finish the pair of socks I was making for my dad. The only problem being is that they ended up fitting my husband’s feet instead so they are now his.
Paton’s Kroy FX socks in the colour Cadet. Picture of my feet hanging up there amidst the ceiling.
Next I decided to indulge in visiting Value Village yesterday. I was looking for two things, more tupperware (as if I don’t have enough) and I always look to see what knitting and science fiction books there are. I’ve been looking for any of Alice Starmore’s books for a long time and finally I scored one yesterday.
Tudor Roses by Alice Starmore. This book is currently valued starting at $99.00 on the used book market. It goes up from there and if I were to order it online through Amazon.ca I’d be paying $200.00 and change for it. Of course this (as my husband pointed out) is only if I’m willing to sell it. Someone in Ravelry said that the book is being re-issued and when it does the value will drop right down but that’s to be expected. I’m only surprised that with copies of used books being sold for over two hundred dollars that the publishers haven’t released the book sooner. Anyhow it’s in perfect shape and since it was a buy four books get one free I can pretend it’s my freebie 🙂
Another interesting thing about the book aside from all the gorgeous sweaters in it is that it gives the history of the Tudor’s and Henry and his wives so even if I never make a sweater from the patterns at least I can read the book and learn something. The patterns are very complex so I might not ever get around to trying out one of the sweaters but they are beautiful. The sweaters are the type that you pull out and work on a little bit at a time until three years later it’s done. LOL, then you hope that it fits and it looks good on you.
Some of the other books I scored:
I’ve been reading Stephanie Pearl-McPhee’s book “Knitting Rules” and its been a fun read so far. Nice to see that I’m not abnormal and share several traits with my fellow knitters, vbg.
Last but not least I thought I’d post a couple of pictures of the snow that fell overnight. Unfortunately by the time the pictures have shrunk small enough to put up on the blog you don’t get the idea of the snow on the branches but it’s really pretty. I guess the snow fell without the wind blowing so it’s just sitting there decorating the trees just like the ideal picture of a Christmas tree decorated for the holidays.
Snow in Whitby, February 28th, 2013
Not much accomplished craft-wise well except for lots of yarn being spun. I did manage to get one sock done today and will cast on for the next. They were supposed to be socks for dad but I went down two needle sizes to get a tighter cloth (too prevent holes) and forgot to add in a few stitches to make up for the size difference. They are now going to be socks for my husband John.
Paton’s Kroy FX Effects sock yarn. I believe the colour is called Cadet.
It snowed overnight.
The depth of the snow on the arm of the chair is how much it snowed as there wasn’t any snow there before. It’s a winter wonderland.
And last but not least, John took a picture of a deer that came up out of the ravine to munch on our grass. This is one of two that takes great delight in chowing down on my green beans in the garden.
Female deer feeding in backyard.
I got a goody in the mail today that I’d ordered just before Christmas.
Package from Lerwick, England.
I have a spindle that I’ve been practising on for several weeks and I finally ran out of roving so I ordered some more from Jamieson and Smith since they had the best prices that I could see with good shipping as well.
I placed the order on December 19th and it was shipped the next day on the 20th and here it is at my front step on December 27th. Talk about fast 🙂 I feel like a little kid in a sweet shop.
I didn’t know how much to order but decided to order as much as I could for the first level of shipping costs. This should keep me busy for a while.
Shetland sheep combed wool tops from Jamieson and Smith.
The shipment consists of:
1-kilogram ball of white/natural
2-sample packs of naturals, each sample pack has 5-25gram samples of white, black, moorit, fawn and grey.
2-sample packs of coloured wool, each sample pack has 14-25gram samples of various colours.
1-ball of yellow J&S-2ply jumper weight yarn.
I like the yellow yarn and have a project that could use it so I tossed it in the order as well.
Just this morning I finished plying a single I had spun and was considering buying some more roving from my local yarn store so this was excellent timing.
I looked up my spindle and it’s an Ashford student spindle. It weighs around 3 ounces and has a 3.5 inch wheel. I’ve found that if I try to spin very fine then I have to be really careful that the fibres don’t separate and the spindle drop. I’ve since read online that I really need a lighter spindle to spin a finer strand of yarn.
Even though some spots of the yarn were fairly fine and even other areas weren’t so when plied the whole thing looks very chunky. In the spindle forum they call this designer yarn, lol.
I’ll just keep on practising with this spindle for a while and then maybe I’ll try and make a lighter one and see how it goes from there.